DetectorMods

Author Topic: some pics of F1A4 ..  (Read 13931 times)

barry

  • Newbie
  • *
  • Posts: 6
    • View Profile
some pics of F1A4 ..
« on: June 01, 2014, 08:27:24 pm »
HI ,,,ALL In my first post I mentioned the mod I did to the std F1A4 lower stalk to make it easy to adapt commercial coils ..

I also built a little amp for enhancing the sound , Just a LM386 chip & a few caps & resistors vol pot & boost switch ,powered by a 9v batt ,Housed in an Altoids tin ..can run to speaker & or H/phones works a treat ..there maybe better chips but I had this LM386 in my bits&pieces,spares..

ON the F1A4 the std speaker is awfully quiet ,I removed it & placed an alluminium Disc [Grounded to the coil socket shielding foil-[ie] little black wire]  in place of speaker to allow for future switches -pots etc any mods I may come aross

CHEERS ,,, BARRY in SA..

woody

  • Administrator
  • Sr. Member
  • *****
  • Posts: 298
    • View Profile
Re: some pics of F1A4 ..
« Reply #1 on: September 23, 2014, 04:18:29 pm »
I think the links are dead.