DetectorMods

Author Topic: Gp 3500 mods  (Read 12023 times)

Steveo1

  • Newbie
  • *
  • Posts: 3
    • View Profile
Gp 3500 mods
« on: December 18, 2016, 09:48:31 am »
Hi woody I'm doing a favour for my mate Gordon. he got his 35 modified by you just wondering can you please  give us some information on the settings and information on how to run it smoothly. thank you regards Steve

woody

  • Administrator
  • Sr. Member
  • *****
  • Posts: 298
    • View Profile
Re: Gp 3500 mods
« Reply #1 on: December 18, 2016, 10:02:36 am »
How long ago was it done? What controls have been added?

Steveo1

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: Gp 3500 mods
« Reply #2 on: December 18, 2016, 11:28:57 am »
About 17 months ago it has 2 round dials 1for frequency and 1 for gain. Thank you.

woody

  • Administrator
  • Sr. Member
  • *****
  • Posts: 298
    • View Profile
Re: Gp 3500 mods
« Reply #3 on: December 18, 2016, 02:37:40 pm »
Set the frequency to half way if using a 11"or 12" coil. If bigger set the frequency to lower if smaller coil increase thr frequency, then set the gain to half and ground balance the detector, swing the coil and increase or decrease the gain so the detector is at just below the point of ground noise, then ground balance again and go swinging.

Steveo1

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: Gp 3500 mods
« Reply #4 on: December 18, 2016, 05:08:39 pm »
Ok thank you. I will give it a try.