Detectormods Forum

General Category => General Discussion => Topic started by: woody on November 21, 2015, 04:06:56 pm

Title: More component upgrades for the GP GPX Detectors Nov 2015
Post by: woody on November 21, 2015, 04:06:56 pm

If you see a cheap GPX-4500 or a cheap GPX-5000 it might be a good idea to hold onto it, I have been very busy working away on some changes to the circuitry that makes a very big difference to depth, by careful component selection and additional active filters we can remove a lot more ground noise while cutting out the radio interference while increasing the input gain to get greater sensitivity and depth. More to come after Beta testing. The current upgrades allow you to get the relative same performance as a SDC2300 without the coil size and type restriction. Depths greater than the GPZ-7000 are obtained and also no coil size restriction.

Title: Re: More component upgrades for the GP GPX Detectors Nov 2015
Post by: shepcal@sti.net on November 22, 2015, 12:11:08 pm

Definitely interested and watching for

Title: Re: More component upgrades for the GP GPX Detectors Nov 2015
Post by: Buffalochip on November 22, 2015, 02:27:09 pm

Will my detector be fitted with the new components? :o

Title: Re: More component upgrades for the GP GPX Detectors Nov 2015
Post by: WesHawkins on December 02, 2015, 02:41:27 am

  Damn,  now I am going to have to send my 3500 back after just getting it back so I can get the newest mods done to it.

Wes.

Title: Re: More component upgrades for the GP GPX Detectors Nov 2015
Post by: woody on December 13, 2015, 08:56:22 pm

It is a very steep curve getting more out of these detectors,  If you have the variable frequency and variable gain you are on par with the best detectors.