Detectormods Forum
General Category => General Discussion => Topic started by: filternozzle17 on August 06, 2017, 11:17:50 pm
-
I have a selection of coils built up over the last six years. Most are DD or Anti Interference, as I hunt in the UK for small hammered silver coins I often need to be able to discriminate iron. I also have a small selection of monos'.
My questions are:
Will a fully modified GPX using either Coiltek/Minelab DDs or Coiltek AI coils give extra noticeable performance? I guess the Coiltek/Minelabe mono coils will benefit but I am not sure about the DD & AI.
My biggest problem is not ground noise but EMI from suburbia/power lines/mobile phone transmitters etc. Sometimes, I cannot get a completely smooth threshold. Will a full modification enable smooth threshold most times?
Is there an optimum coil size for a modified GPX? I use both the 4500 & 5000.
-
I have a selection of coils built up over the last six years. Most are DD or Anti Interference, as I hunt in the UK for small hammered silver coins I often need to be able to discriminate iron. I also have a small selection of monos'.
My questions are:
Will a fully modified GPX using either Coiltek/Minelab DDs or Coiltek AI coils give extra noticeable performance? I guess the Coiltek/Minelabe mono coils will benefit but I am not sure about the DD & AI.
My biggest problem is not ground noise but EMI from suburbia/power lines/mobile phone transmitters etc. Sometimes, I cannot get a completely smooth threshold. Will a full modification enable smooth threshold most times?
Is there an optimum coil size for a modified GPX? I use both the 4500 & 5000.
Any answers for this one Woody?
-
I have a selection of coils built up over the last six years. Most are DD or Anti Interference, as I hunt in the UK for small hammered silver coins I often need to be able to discriminate iron. I also have a small selection of monos'.
My questions are:
Will a fully modified GPX using either Coiltek/Minelab DDs or Coiltek AI coils give extra noticeable performance? I guess the Coiltek/Minelabe mono coils will benefit but I am not sure about the DD & AI.
My biggest problem is not ground noise but EMI from suburbia/power lines/mobile phone transmitters etc. Sometimes, I cannot get a completely smooth threshold. Will a full modification enable smooth threshold most times?
Is there an optimum coil size for a modified GPX? I use both the 4500 & 5000.
Hello Woody, appreciate your opinion, thanks.
-
Hi filternozzle17,
Check the available products on the DetectorMods web page. There is an interference filter that may help.
Peter
-
Hi filternozzle17,
Check the available products on the DetectorMods web page. There is an interference filter that may help.
Peter
Thanks Peter. Just checking if the interference filter is also part of a full modification?
Richard
-
Hi filternozzle17,
Check the available products on the DetectorMods web page. There is an interference filter that may help.
Peter
Thanks Peter. Just checking if the interference filter is also part of a full modification?
I see the filter is out of stock at the moment. What is the modification that is required to the stock battery Peter?
Richard