Model | Variable pulse/frequency | Variable gain | Normal-bright audio |
---|---|---|---|
GP extreme | MSD | ||
GP 3000 | MSD | ||
GP 3500 | MSD | ||
SD 2000 | Normal-deep | ||
SD 2100 | 3&4 pulse-timings | ||
SD2100v2 | MSD | ||
SD 2200d | MSD & mineral timings | ||
SD2200v2 | MSD | ||
GPX 4000 | MSD or Variable frequency | ||
GPX 4500 | MSD or Variable frequency | ||
GPX 4800 | MSD or Variable frequency | ||
GPX 5000 | MSD or Variable frequency |
GPX Series
- GPX 4000
- GPX 4500
- GPX 4800
- GPX 5000
We add three timing positions allowing the detector to be optimised for various sized targets and a range of coils. Our new variable front-end gain allows you to tune your machine to have the best performance possible regardless of conditions. These modifications have been proven to find previously undetectable nuggets.
GP Series
- GP extreme
- GP 3000
- GP 3500
We add three timing positions allowing the detector to be optimised for various sized targets and a range of coils. A boost switch is added which allows for extra depth when using the detector in sensitive mode. Our new variable front-end gain allows you to tune your machine for the best performance for all conditions.
SD 2000
This low frequency super deep modification allows you to use large coils for the most depth possible with the ability to switch back to normal operation, gain control to tune your detectors signal amplification to best suit your situation. The SD 2000 can also be modified for small gold upon.
SD 2100 Series
- SD 2100
- SD 2100e
- SD2100v2
We add three timing positions allowing these detectors to be optimised for various sized targets and a range of coils. Added audio frequency boosting gives a sharper response for the detection of gold. A switch is added to allow 3 or 4 pulses which can improve the detectors ability to deal with variable ground.
SD 2200 Series
- SD 2200d
- SD2200v2
We add three timing positions to allow the detector to be optimised for various sized gold and a range of coils. A switch gives you three ground mineral timings to best suit the ground you are detecting on and our new Variable Front End Gain allowing you to tune your machine to have the best performance possible regardless of conditions.
Shipping your detector
To ensure your detector's safety, we've written a general guideline for packaging and shipping your control box. We personally follow these guidelines while repackaging your detector.
Packaging
We only need your control box to perform the upgrades, however, you need to assure it will be safe while in the post. Be sure to use a lot of packaging material around the plastic endcaps as these are most prone to being cracked and broken in the post. We find using scrunched newspaper sheets around the detector to work best.
Make sure you've completed an order form. If you're unable to print, state clearly on paper you contact details, services you would like performed to your detector and any other information necessary.
We suggest packing your control box in either an appropriate-sized cardboard box or a 3kg satchel available from your local post office. Ensure you have securely attached the shipping label to the exterior of your parcel that was printed with your order form.
Print an order
If you don't own a printer, write your details down on paper to ship with your detector and copy the shipping address from the next page after completing the form below and clicking print.
Quotes and payments
Contact us for payment options and special quotes such as repairs and additional services.